Secure Premium Anti-Slip Tape

Composition | Technical Data

• Surface (Texture): Diamond.
• Adhesive: Acrylic.
• Tape Dimensions: 50mm x 5,000mm.
• Available Color: Black.
• Thickness: 80 microns.
• Temperature Resistance: -10°C to +70°C.

Physical Properties

• Tensile Strength (L): Minimum of 30.3 N/25mm.
• Elongation (L): Minimum of 100.0%.
• Adhesion and Tack: Minimum of 2.0 N/25mm.
• Liner Weight: 130.0 +/- 10.0 N/25mm.
• Dimensional Stability: -4% (L) / -1.5% (T).

Instructions for Use

• Cutting: Cut the tape to the desired size and round off corners to prevent critical peeling points.
• Application: Peel the end, align to the target area, and adhere the remainder by gradually unpeeling the protective backing, preventing fingers from touching the adhesive.
• Fixation: Apply hard pressure and use a rubber hammer or roller to guarantee full bonding to the surface.
• Curing Time: The optimal bond sets 12 hours after the installation.

Important Recommendations

• Surfaces: Do not apply to porous substrates or directly over floor joints (grout), even on ceramic tile setups.
• Grout Floors: The tape must be placed wholly on the surface of single unbroken tiles, avoiding spans and gaps.
• Load and Traffic: Unsuited for motorized traffic, heavy machinery (like forklifts), or very high-density pedestrian zones.
• Handling: Avoid scraping pieces of furniture or items over the tapes; use carts with soft rubber tires if relocation is needed.
• Water Contact: In potentially wet zones, a strict 12-hour wait post-application is mandatory to secure the seal.

Storage and Shelf Life

• Storage: The unit should be housed in original factory packaging within a temperature scope of 15°C to 27°C.
• Shelf Life: Proper long-term storage yields a 24-month span of usefulness post-manufacture date.