Secure Anti-Slip Tape PHOSPHORESCENT - Image 2

Secure Anti-Slip Tape PHOSPHORESCENT

The Secure Phosphorescent Anti-Slip Tape is recommended for use on steps, stairs, corridors, ramps, indoor and outdoor floors and, especially, at emergency exits. It features an abrasive texture and visual signaling that helps orientation in low-light environments.

Applications

Slip Prevention

Surfaces/Materials

Floors

Stairs

Features

Abrasive Texture

Phosphorescent

Segment

Safety

Format

Rolls

Composition | Technical Data

Base Material: Abrasive.
Adhesive: Solvent Acrylic.
Tape Dimensions: 50mm x 5,000mm.
Available Color: Black with green phosphorescent strip.
Total Fixation: Starting 48 hours after application.
Shelf Life: 24 months from the manufacturing date.

Benefits

Safety in Emergencies: The phosphorescent strip allows escape routes to be seen even during power outages.
High Grip: The solvent acrylic adhesive ensures robust fastening on various smooth surfaces.
Resistance: Abrasive texture designed to prevent slips in critical areas.
Versatility: Can be applied in both indoor and outdoor environments.

Instructions for Use

Preparation: We recommend using a remover on the surface, followed by washing with soap and water to completely remove grease, waxes, and fine dust. The surface must be completely dry before application.
Cutting and Fitting: Cut the tape to the desired size, rounding the tips to prevent early peeling points.
Application: Peel off the end of the tape and gradually remove the protective paper while applying it in the desired position. Avoid finger contact with the adhesive during this step.
Finishing: Press the tape firmly against the floor to ensure it is completely fixed.

Important Recommendations

Interrupted Surfaces: Do not apply over floor seams or grout, even on ceramics. The tape should cover only whole tiles.
Use Restrictions: Do not apply on porous surfaces or areas subject to automotive vehicle and forklift traffic.
Foot Traffic: Not recommended for areas with extremely intense foot traffic.
Care with Objects: Do not drag objects over the tape; use transport means with soft rubber wheels if necessary.
Water Exposure: In areas subject to humidity, wait at least 12 hours after application to allow initial fixation before wetting the site.

Storage and Conservation

Ideal Conditions: The product should be stored in its original packaging, in a dry and ventilated location.
Temperature: Keep between 15ºC and 27ºC to preserve adhesive and phosphorescent properties.
Organization: Avoid direct contact with the floor or damp walls during storage.

Our sales team is available to answer your questions, provide product information, and help you make the right choice for your application.