Imported Secure Anti-Slip Tape
Composition | Technical Data
- Backing: PVC Film.
- Abrasive: Brown aluminum oxide.
- Adhesive: Resin over Resin.
- Available Color: Black.
- Thickness: 80 microns.
- Temperature Resistance: -10°C to +70°C.
Available Dimensions
| Width | Length |
| 50 mm | 5,000 mm (5 meters) |
| 50 mm | 20,000 mm (20 meters) |
Physical Properties
- Tensile Strength (L): Minimum of 30.3 N/25mm.
- Elongation (L): Minimum of 100.0%.
- Adhesion and Tack: Minimum of 2.0 N/25mm.
- Liner Weight: 130.0 +/- 10.0 N/25mm.
- Dimensional Stability: -4% (L) / -1.5% (T).
Instructions for Use
- Surface Preparation: Apply a remover to the surface and wash with soap and water to eliminate grease, wax, and fine dust; dry completely before installation.
- Cutting: Cut the tape to the desired size and round the corners to eliminate critical peeling points.
- Application: Peel back only the edge, adjust to the area, and stick the rest by gradually removing the backing paper, avoiding finger contact with the adhesive.
- Fixation: Press the tape firmly and use a rubber hammer or roller to force total fixation to the floor.
Important Recommendations
- Installation on Grout Floors: Never apply the tape continuously over grout lines; it must cover only entire floor tiles.
- Location Restrictions: Not indicated for industrial kitchens, butchery shops, slaughterhouses, machine shops, or highly oily areas.
- Traffic and Load: Not recommended for automotive traffic, forklifts, or heavy pedestrian traffic.
- Maintenance: Avoid dragging objects over the tape and do not wash the area excessively.
- Curing Time: After application, wait a minimum of 12 hours before wetting the zone.
Storage and Shelf Life
- Storage: The product must be kept in a place with a temperature between 15°C and 27°C.
- Shelf Life: Under ideal storage conditions, the preserved packaged life is 24 months.
