Secure Anti-Slip Tape

Composition | Technical Data

• Backing: PVC Film.
• Abrasive: Brown aluminum oxide.
• Adhesive: Resin over Resin.
• Available Color: Black.
• Thickness: 80 microns.
• Temperature Resistance: -10°C to +70°C.

Available Dimensions

Physical Properties

• Tensile Strength (L): Minimum of 30.3 N/25mm.
• Elongation (L): Minimum of 100.0%.
• Adhesion and Tack: Minimum of 2.0 N/25mm.
• Liner Weight: 130.0 +/- 10.0 N/25mm.
• Dimensional Stability: -4% (L) / -1.5% (T).

Instructions for Use

• Surface Preparation: Apply a remover to the surface and wash with soap and water to eliminate grease, wax, and fine dust; dry completely before installation.
• Cutting: Cut the tape to the desired size and round the corners to eliminate critical detachment points.
• Application: Peel back the edge, adjust to the area, and stick the rest by gradually removing the protective paper, avoiding finger contact with the adhesive.
• Fixation: Press the tape firmly and use a rubber hammer or roller to force the strip’s total fixation to the floor.

Important Recommendations

• Installation on Grout Floors: Never apply the tape continuously over grout; it should only cover whole floor tiles.
• Location Restrictions: Not indicated for industrial kitchens, butcher shops, meatpacking plants, or highly oily areas.
• Vehicle Traffic: Not recommended for automotive vehicle ramps, forklifts, or areas with intense foot traffic.
• Maintenance: Avoid dragging objects over the tape and do not wash the area frequently.
• Curing Time: After application, wait at least 12 hours before wetting the area.

Storage and Shelf Life

• Storage: The product must be kept in a dry place, with a temperature between 15°C and 27°C.
• Shelf Life: Under ideal storage conditions, the product’s shelf life in its packaging is 24 months.